Maintenance of massage bathtub
1, if there is scratches on the bathtub surface, only need to use 2000# water sanding paper to polish, and then coated with toothpaste, with soft cloth polishing can be bright and clean as new.
2, bath surface scale can use light acid detergent, such as lemon juice, vinegar, add hot, wipe with soft cloth.
3, hydraulic friction cleaning device of 40 degrees Celsius hot water to fill the bathtub, 2 grams per liter dose detergent, start the hydraulic massage for about 5 minutes, stop the pump drainage, and then fill the cold water, start the hydraulic massage for about 3 minutes, stop the pump drainage and clean the bathtub.
4, the cylinder surface dirt, can be wiped with wet towel, this process can be repeated three times, you can clean and smooth as new.
5. Do not use clean surface of the cylinder with rough surface and tools, containing chemical solvents or particles.
6, do not use hard objects, knife percussion description of the bathtub surface, but also should not let cigarette butts or higher than 70 exposure system heat source contact the bathtub surface.
7, after using the bathtub, should exhaust water and disconnect the power supply.
8, backwater and nozzle if the hair and other debris blockage, you can unscrew clean.
9, gold-plated, chrome plated parts do not need to wipe regularly.
