①Purchase high-quality tempered glass doors
Toughened glass must be selected with the 3C certification mark on the product certificate.
In addition, we can also see whether the glass is transparent,
Whether there are defects such as dots and bubbles
Wear polarized sunglasses to watch the glass,
Tempered glass should show colored streaks.
②Install the glass door correctly
In order to prevent the self-explosion of tempered glass caused by improper installation,
Try to buy products,
Manufacturers are required to provide professional on-site installation,
In this way, problems can be held accountable.
③Key protection glass corners
The edges of the tempered glass are weak,
Once there is a crack, it is easy to smash the whole piece of glass.
in daily life,
Be sure to protect the corners of the glass,
Check regularly for cracks in the corners.
④Paste explosion-proof film or buy laminated glass shower room
Put an explosion-proof film on the glass door,
increase strength,
Even if the glass bursts, it will stick to the film,
Prevent glass shards from splashing and hurting people.
Why is there such a big difference in shower room prices on the market?
Some customers said, I don't know where the shower room you sell is so expensive. The shower room of 3,000 yuan and the shower room of 1,000 yuan look the same. I don't see how you can sell it better?
Yes, the shower rooms look the same, but can you guarantee that the quality of the shower room of 3000 yuan is the same as the shower room of 1000 yuan? Do you know what materials are used for the glass, hardware and rubber strips used in the 1000 yuan shower room? Is it?
Don't be naive~ Give you 4 reasons why I can't sell a cheap shower room? !
1. Look at the glass
①A good shower room has transparent glass and no defects such as dots and bubbles.
②There is 3c mark certification on the original glass of good shower room.
2. Look at the profile
①Look at the hardness of aluminum
Brief analysis: The thickness of the qualified shower room aluminum material is above 1.2mm, and the glass aluminum material for hanging on the rail must be above 1.5mm. The hardness of aluminum can be tested by pressing the aluminum frame by hand. Aluminum with a hardness of 13 degrees or more is difficult for an adult to deform by pressing it by hand.
②A good shower room has a smooth surface, no chromatic aberration and trachoma, and a high profile finish.
3. Look at the pulley
①Look at the material of the pulley and the sealing of the wheel seat
Brief analysis: The wheel seat of the pulley should be made of compression-resistant and heavy-duty materials, such as 304 stainless steel and high-end synthetic materials. The seal of the wheel seat is good, water vapor is not easy to enter the wheel, and the smoothness of the wheel is guaranteed.
②Look at the fit of the pulley and aluminum track
Brief analysis: The pulley and the track should be closely matched, with a small gap, and not easy to fall off when impacted by external forces to avoid safety accidents.
4. Look at the water tightness of the shower room
Brief analysis: The main observation parts of the water tightness of the shower room are
①The junction of shower room and wall
②The joint between the door and the door
③The connection between the shower room and the stone base and bottom basin
④Check the sealability of the rubber strip and the rubber strip
