Flat type glass shower door hinge fitting

Glass door hinge is used for clamp glass and the wall

As hinge of the glass door

Usually made in stainless steel 304 and stainless steel 316

Finishing is satin and mirror

Maintenance guidelines:

• Our hinges are greased at the factory for quiet and trouble-free operation

• If there is any squeaking that occurs after installation, put a drop of 3 in 1 oil (also known as “ household oil) on the white nylon washer that the hinge body pivots on

• Washer is the component that acts as a buffer, so the body of the hinge does not pivot directly on the brass center block

• This solution does not require the dis-assembly of the hinge

Note:

• Do not use spray lubricant on these hinges

• If the hinge has been disassembled, upon re-assembly, use white lithium grease to lubricate the interior mechanism

• Never use an abrasive cleaner on the hardware

• Many of the components are coated with a clear lacquer drying the hardware with a clean, soft towel on a daily basis is the best way to maintain the hardware

• If mineral deposits build-up, mix a couple of drops of a mild liquid soap( such as ivory or a similar product) into a cup of warm water

• Using a soft, non-abrasive cloth, clean the hardware

• Rinse thoroughly with clean, warm water and dry